Advantages Description Colors Maintenance Downloads Contact & FAQ

OLI-AQUA TOP 51.20 I Two-component parquet sealer

Water-based 2c parquet floor sealer for floors subject to intensive wear, and for sports hardwood floorings.

Water-based two-component parquet floor sealer for floors subject to intensive wear, and for sports hardwood floorings
For public locations and sports floors - tested according to EN 14904
3 roll-on applications I 100-120 g/sqm per coat (8-10 sqm/l)
Extremely high abrasion / chemical resistance - meets ÖNORM C 2354 Category C
Flame retardant Cfl-s1 according to EN 13501-1
Emission-tested construction product according to DIBt principles

OLI-AQUA TOP 51.20 I Two-component parquet sealer

The product

OLI-AQUA TOP 51.20 I 2c parquet sealer is our premium two-component water-based sealer for parquet and hardwood floors subject to intensive wear. It was specifically designed for public and business areas. The product is tested according to EN 14904 and therefore suitable for the application on all sports floors in Europe. It also meets the fire protection classification ‘flame retardant’ according to EN 13501-1 Cfl-s1, which is often required in calls for tenders. On request, OLI-AQUA TOP can be provided in an anti-skid version according to R9 or R10, as well as with an antibacterial effect. OLI-AQUA TOP is the ideal top coat for all special effects and coloured coating systems with OLI-NATURA Project Oil, OLI-NATURA HS Color Oil, OLI-NATURA Vintage and OLI-NATURA Antique.

Order notes
Testing standards
Application description

Gloss:

Matt (A02797), semi matt (A00706), high gloss (on request (A00727)

Packaging:

5 litre

Hardener:

For the gloss matt, semi matt, high gloss use the hardener OLI-AQUA Härter 13.2 (A00699) at a ratio of 10 : 1

Consumption:

3 roll-on applications I 100-120 g/sqm per coat (8-10 sqm/l)

Tools:

‘Micromeister’ roller for water-based lacquers

Giscode W2/DD+
EU – Decopaint Directive
Z-157.10-15 (low-emission; certified construction product in accordance with DIBt standards)
DIN 71-3 (safety of toys)
DIN 53160 (saliva and sweat proof)
DIN 68861 T1 B, C (chemical resistance)
DIN 68861 T4 (scratch resistance)
EN 14904 (sliding friction coefficient)
EN 13501-1Cfl-s1
free of NMP and NEP

Handling instructions: Optimum processing conditions are: +20°C and 50% relative humidity. Do not use at floor temperatures below +15°C. Apply material at room temperature and shake well before use! Mix OLI-AQUA TOP 2c Parquet sealer 51.20 immediately before use at a ratio of 10:1 with OLI-AQUA hardener 13.2. Leave for 10 minutes before continuing. Pot life is 3 hours. Do not pour back excess material. Do not pour the material on the ground, apply directly out of the container. Please consult our technical department for the use on exotic woods! An intermediate sanding is indispensable if the intermediate drying time exceeds 12 h. Overcoating on the same day after intermediate sanding!

Surface preparation: Graded wood sanding with grit 80/100/120. The finer the sanding, the lesser the wood roughens. The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicon and sanding dust. Apply a priming coat with OLI-AQUA PRIME 15.81 to minimize side-bonding. For the renovation of old parquet flooring and for critical floors, we recommend an additional roller application with OLI-Universalgrund 1.50 for insulation and as adhesive agent.

Setup recommendations:

Roll the material in sections uniformly thinly, approx. 100 g/sqm.
After 2-3 h drying, apply a second roll-on coat with 120 g/sqm.
After overnight drying, intermediate sanding with grit 120-150.
Vacuum-cleaning. Then third roll-on coat with 120 g/sqm.
The floor may be used with care after 5-6 h. Floor is fully wear-resistant after 8-10 days.

Colors:See colors of OLI-NATURA HS Professional Oil