OLI-AQUA ECO M 18.27 I 1K Multilayer Lacquer

Water-based 1k clear acrylic lacquer with outstanding layerable stablity and very beautiful enhancement for the furniture paint series.

  • Low-viscosity 1K water lacquer for spraying and casting
  • For the serial coating of flat furniture elements
  • Very fast drying and good staple strength
  • Good resistance against many household chemicals
  • Certified according to IOS-MAT-0066 P1 R2, R4.
  • EU VOC Compliant
OLI-AQUA ECO M 18.27 I 1K Multilayer Lacquer

The product

OLI-AQUA ECO M 18.27 | 1K multilayer lacquer is a very fast stacking 1K water lacquer with a nice grain accentuation for the serial spray painting of flat furniture and wood components throughout the interior. The material is suitable for spraying automats, can be sanded easily, forced drying and IR drying are both possible. It´s fat and perspiration resistant as well as PVC-resistant. The entire ECO series convinces with high chemical and mechanical resistance and fulfills IKEA MAT-0066 P1, R2 and R4 required by IKEA for residential and office furniture. It´s most suitable for overpainting the colour varnish >OLI-AQUA ECO B 18.28 | 1K-Buntlack<

  • Order notes
  • Testing standards
  • Application description
Gloss:

NV Matt (A04094), Satin Matt (A00717), Satin Gloss (A00749)

Containersizes:

30, 10 litre

  • EU- DecoPain compliant
  • DIN 71-3 (safety of toys)
  • DIN 53160 (saliva and sweat proof)
  • DIN 68861 T1 B, C (chem. stability)
  • IOS-MAT-0066 P1 R2, R4
  • Free of formaldehyde, aromatics, NMP and NEP

Surface preparation: 

  • Graduated wooden sanding with grit size 150/180. The finer the sanding, the smoother the wood becomes.
  • The surface must be dry, thoroughly cleaned, and free of oil, wax, grease, silicon and sanding dust.
  • Woods rich in resin and active substances such as pine, tropical woods (limba, teak, wenge) should be stripped before being coated with a 2K lacquer (e.g. OLI-AQUA MODU M). This also applies to MDF edges and sections, to minimise the chance of swelling in high humidity conditions.

Setup recommendations: 

  • Apply a priming coat with approx. 80 g/sqm
  • After 3,5 h drying, intermediate sanding with grit 240
  • Top coat with approx. 120 g/sqm

Talk to us:

*Required fields

Your stored dealer

They have not yet saved a dealer.

Select dealer




All news conveniently by e-mail

data protection