OLI-AQUA PRO M 18.10 | 1C-Multi-coat varnish

Self-crosslinking, water-based 1C acrylic varnish with a very good price-performance ratio, suitable for the entire furniture industry, store and interior design and for painting chairs.

  • Self-crosslinking 1-component water-based lacquer for industrial furniture coating
  • Excellent price-performance ratio.
  • High block strength and good stability, can be sanded quickly
  • Thixotropic adjusted, PVC-resistant, cream and sweat-resistant
  • Elegant, highly transparent surface finish, good lightfastness
  • Certified according to Möbelfakta Cat. 2 and IOS-MAT-0066 R4, compliant with EU-Decopaint Guideline
OLI-AQUA PRO M 18.10 | 1C-Multi-coat varnish

The product

OLI-AQUA PRO M 18.10 | 1K multi-coat varnish has a high fullness level, spreads evenly, is fast drying, has good blocking resistance, and a high stability level. The material is free of microfoam. A turbidity effect, which reduces the gloss and causes restrictions on dark woods, can therefore be prevented. The varnish is in a medium viscosity range and can therefore be used with airless/airmix systems a beaker-gun and spraying automats. Forced drying or IR drying are both possible. OLI-AQUA PRO M 18.10 offers strong resistance to creams, in addition to a good softening resistance in comparison with standard PVC sealants. It suits the requirements for IOS-MAT-0066 R 4 that are required by IKEA for residential and office furniture and the MÖBELFAKTA standard cat. 2.

read more
  • Order notes
  • Testing standards
  • Application description
Glosslevel:

Silk matt, Matt

Containersizes:

30 litre

  • EU decopaint directive
  • DIN 71-3 (toy safety)
  • DIN 53160 (saliva and sweat proof)
  • DIN 68861 T1 C, B for selected media (chemical resistance)
  • IOS-MAT-0066 R 4
  • MÖBELFAKTA standard cat. 2
  • DIN EN 13501-1 B-s2, d0 (flame retardant)

Surface preparation: 

  • Graduated wooden sanding with grit size 150/180. The finer the sanding, the less the wood will roughen.
  • The surface must be dry, thoroughly cleaned, and free of oil, wax, grease, silicon and sanding dust.
  • Woods rich in resin and active substances such as pine, tropical woods (limba, teak, wenge) should be stripped before being coated with a 2K varnish (e.g. OLI-AQUA MODU T). This also applies to MDF edges and profiles, to minimise the possibility of swelling in high humidity conditions.

Setup recommendations: 

  • Prime material with approx. 100-120 g/m²
  • After 2 hours of drying, carry out interim sanding with grain size 240.
  • Final coating with approx. 100-120 g/m²

Talk to us:

*Required fields

Frequently asked questions

To the FAQ