Advantages Description After-treatment and care Downloads Contact & FAQ

OLI-NATURA Wood outdoor cleaner

For the intensive basic cleaning of wooden yacht decks, terraces and garden furniture.

Highly effective cleaning concentrate, use diluted
Suitable for untreated or oiled wood such as garden furniture, yacht decks or terraces
Cleans thoroughly, quickly, gently weathered wood surfaces
Removes green cover
Low odor

The product

OLI-NATURA Wood Outdoor Cleaner is a soft intensive cleaner for all outdoor weathered wooden surfaces. Dirt and green growth can be etched easily without causing damage to the wood.

Order notes
Testing standards
Application description

Containersizes:

1 litre

Giscode GG0

Processing recommendation:

Sweep, vacuum or brush off coarse soiling
Mix the exterior cleaner with warm water in a ratio of 1:4 and apply it generously to the wood with a nylon brush or Scotch-Brite™ sponge
After approx. 20 minutes, loosen the dirt and green coating with the nylon brush or a Scotch-Brite™ sponge. Repeat treatment in case of severe weathering.
Finally, rinse with plenty of water and allow to dry completely. As the wood is somewhat leached out after this treatment, if necessary, smooth any standing wood fibres and rough spots with fine sandpaper (220 grain).
Impregnate the surface with OLI-NATURA Yacht & Teak Oil as required

After-treatment and care

Oiled wood also turns grey over time. If you wish to avoid this discolouration for reasons of appearance, you should refresh the natural colour of the wood regularly. In order to this, before coating with oil, the surface should be cleaned with water and „OLI-NATURA Wood Outdoor Cleaner“, which is scrubbed with a nylon brush in the direction of the grain, depending on the degree of dirt and contamination. With garden furniture, it is advisable to briefly smooth the roughened wood fibres with fine sandpaper once again. After rinsing and drying, apply one or two coats of „OLI-NATURA Yacht & Teak Oil“ with an oil brush, roller or cotton cloth. Depending on the temperature, it will be dust-dry after 1-2 hours and fully hardened after 2-3 days. Subsequent oiling can be done without sanding.